Sovol SV06 Clip-On BTT Pi V1.2 Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BTT Pi V1.2 box designed to clip on to Sovol SV06 Mainboard housing
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my rendition of a clip on box to mount a BTT Pi v1.2 board onto a Sovol SV06 printer.
The box was extruded out of PLA and the clip out of PETG. I originally planned on using PLA for everything, but there were reports in the comments for the original clip that the heat coming from the main board made the PLA clip sag over time, so I went with PETG.
The box is made to be assembled using M3 screws. Just screw them from the top and bottom into the middle piece. The screws will create their own threads.
There are two ways to connect the box to the clip. You can use M4 screws & nuts to fasten the clip to the box or press M3 heat set threaded insert into the clip and use M3 screws.