1 / 2
Y-Piece to enable a bypass to feed filament without or through a second PTFE-Pipe — zdjęcie 1
1 / 2

Y-Piece to enable a bypass to feed filament without or through a second PTFE-Pipe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

To reduce pipe length for flexible filament, I have designed this Y-Piece to feed the filament from top of my enclosure.

Ocena
5 / 5
Polubienia
20
Pobrania
99
Wydruki
2
Wyświetlenia
770
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial
Print instruction:
  • material: PETG
  • supports: recommended (see attached picture)
  • layer height: 0,2mm
  • nozzle diameter: 0,4mm
  • brim: recommended
  • enclosure: not required

Tagi