Toniebox CC3200 debug adapter positioning aid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To access the debug port of the Toniebox CC3200 PCB - you just need some "acupuncture" needles (used to clean nozzles)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 618
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
To access the debug port of a CC3200 Toniebox PCB, you can use some specialized adapters, soldering skills or - and this is something many of us will have - acupuncture needles.
In order to easier position the needles (1/20" spacing…) and prevent short-circuiting them, I printed a positioning aid - basically a block with 10 holes.
Kudos to “Teddycloud” project and their “CC3200 newbie guide” - https://forum.revvox.de/c/toniebox-hardware/11
You can scale in Z direction if you want more stability.
I ran the needles through jumper cables above the printed block, in order to establish connection to my UART programmer, and also put shrink tubes over the “handles” of the needles in order to maintain insulation (I didn't shrink them, just loosely put them over).