1 / 4
Propeller for Tutut Flitzer / Go!Go! Racer helicopter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spare part: Propeller for fire department helicopter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As my little one had a little too much power, the helicopter's propeller had to suffer. So I dismantled the helicopter and removed the old propeller. As a replacement part, I then designed the propeller found here, which is almost identical to the original in terms of diameter and mount.
The part can be printed without a support structure.
I printed the spare part with Bambu PLA on my A1 Mini.