1 / 2
Globe Theatre
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Layered Gobe Theatre model with accurate details and geometry and great prntability.
- Ocena
- 4,4 / 5
- Polubienia
- 62
- Pobrania
- 863
- Wydruki
- 5
- Wyświetlenia
- 3713
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Historical Context
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 5) (Komentarze: 10)Remiksy (0)Kolekcje (73)Powiązane
A (mostly) realistic model of Shakespeare's Globe Theatre. It comes in four layers that are individually printed (with alignment pins) so there is no extreme bridging or supports required. It also lets you see inside each layer for educational purposes.
This was designed as a teaching aid for my partner who is an English teacher.
You can check out more information about my 3d printing journey here: wigglememore3d.com.
Print settings:
- Scale - whatever fits on your print bed, would not recommend less than 30% otherwise small details could be lost
- Layer height 0.2mm
- 2 perimeters
- 2 bottom and 3 top layers (4 would be better)
- 10% adaptive grid infill
- eSun White PLA+ at 208/65 degC
- Supports not needed apart from the edge of the roof section (or you can just let it 'fail' on that section and snip off the ugly bits like I did)
- Post-printing you might need to enlarge the alignment pin holes with a 6mm drill bit
- 100% fan from layer 3