MCS Parts Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of several parts for the MCS Multi Color System for Prusa MMU3. Changed and refined a few things.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Upright spacing similar to the original. Bases fit tightly to a 2x3 post. Melamine sheet was too narrow. Would use a 12x20 sheet next time. Magnets in the original were hard to glue/mount. This version makes this much easier. I used a touch of the tip of a hot glue gun. Barely any. And it secured them instantly vs. having to wait.
This version both eliminates some hardware (L Brackets), and cleans up the overall “Finished Product” look / feel.
Spool Holders use a 608zz Bearing at each end and roll smoothly. If there is too free a movement in the rollers, using a small rubber band adds a slight resistance to the roller, and prevents free rolling of material and stops unraveling and binding for the most part.