Embroidery Hoop Holder Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hoop holder for needle point. uses 25mm pipe. fusion file for adjustments.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 574
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
made this for my wife because i didn't want to pay multiple hundreds of dollars for a commercial one.
uses ¼"-20 bolts and nuts, 25mm pipe and heavy wooden base
end caps for the pipe to make toddler safe. the knobs for the head use captive nuts that may need to be pounded into the slot for a tight fit but once installed are very convenient.
i think assembly is fairly straight forward. big clamp is more suitable for the large pvc style frames while the cam clamp works fine for normal hoops like the one shown in picture.
i printed without supports and everything turned out fine. 30% infill gyroid. make sure to print the pivots flat so that the outline is the entire curve. printing vertically will make layers too weak to clamp tight enough to hold properly.