MT32Pi Zero Case for use with Yavimaya Maker's Hat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for an MT32 Pi using a Pi Zero 2W and the MT32 Pi Hat sold by Yavimaya Maker
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is an enclosure for an MT32 Pi using a Pi Zero 2W and the MT32 Pi Hat sold by Yavimaya Maker at:
https://www.tindie.com/products/taviens/mt32pi-hat-for-zero-2w-model-raspberry-pi/
It's based on the one they created, but it has a number of improvements:
- I added a cap to the power toggle switch to make it easier to access
- I modified the buttons a little so they would have a bit less play
- I expanded the opening for the Pi Zero, as it was a little fiddly to get in
- I added labels to the buttons on top to remind you what they're for
- I closed up the port openings to actually frame the ports properly
Getting the switch cap to settle onto the switch might be a bit tricky depending on your printer's tolerances.
The microSD card is a little tricky to get at, but if your fingernails are too short, just about any small tool should be able to pry it out. (you could even use the usb cable angled in just right)