KingKong ET100 Propellers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of the KingKong ET100 propeller. I ran out of props during quarantine and shipment is on its way for 2…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a model of the KingKong ET100 propeller. I ran out of props during quarantine and shipment is on its way for 2 months already so I decided to attempt to design and print some myself. I only uploaded one side of the props so if you need to print a set you need to mirror 2 of them.
It's currently under development and it works but not as well as I want it to.
demo video - https://www.reddit.com/r/3Dprinting/comments/j42hkp/first\_attempt\_at\_3d\_printing\_mini\_quad\_props\_they/
**The screw holes in the current model are a tiny bit off from the motor hole. You can still screw it in with a little force but this will be fixed in the next version.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
0.1-0.15
Infill:
100%
Filament:
Generic PLA Green
Notes:
Most printers will be able to handle the curve without supports at 0.1 or 0.15.
Category: R/C Vehicles