Camera Lens-hood for QIDI TECH 3Dprinter (X-PLUS3 or Q1 Pro or X-Max3 or Others)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In order to prevent from hitting the head, I redesigned lens shade so that it only covers a part of the lens.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 135
- Wydruki
- 1
- Wyświetlenia
- 791
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
The internal camera of the XPLUS3 is affected by the internal LED lights, causing severe flare.
If a self-made lens hood is attached here, it will hit the print head at maximum approach and cause damage accidents (This actually happened to me).
In order to prevent from hitting the print head, I redesigned lens shade so that it only covers a part of the lens.
I tested only XPLUS3.
When attaching the lens hood, the head should be positioned like the picture with X=minimum Y=maximum.
Material:
PETG, ABS, etc. (PLA is not suitable).