Adapter to use MTB bleding kit funnels (M5) on Shimano road levers (M7)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use MTB bleed kits to bleed road levers. Print in whatever material and whatever precision give you a suitably well-…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 222
- Wydruki
- 0
- Wyświetlenia
- 985
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
Use MTB bleed kits to bleed road levers. Print in whatever material and whatever precision give you a suitably well-formed threads, preferably in some material that is much softer than the material of the Shimano road levers. Install a 1.5mm thick O-ring (or whatever else you have that will seal) on the M7 side. Don't overtighten. If you do and break the top off, you should be able to remove the lower bit with a 3mm hex key.
Post-Printing
Install a 1.5mm thick O-ring on the M7 thread. If you happen to break off the top part of the adapter you should be able to remove the lower part with a 3mm hex key.
Category: Sport & Outdoors