1 / 3
Christmas Ball Ornament Lantern for puck light
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
184 mm ball with 80mm open base to fit a puck light.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Print the ball in translucent filament starting after 3mm Z.
- 0.20 mm layer
- 0.40 mm nozzle
- Grid supports from build plate only
- scaling down will result in an opening too small for the puck light
- hanger will require supports, glue it to the ball after printing
(red lantern shown was rev 1)