Echo Helmet Bad Batch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Number 5 in the this series of the Bad Batch characters and I have to say, after having worked on it for 40 plus…
- Ocena
- 0 / 5
- Polubienia
- 139
- Pobrania
- 688
- Wydruki
- 1
- Wyświetlenia
- 2841
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Number 5 in the this series of the Bad Batch characters and I have to say, after having worked on it for 40 plus hours. I have come to like it the most. I went all out on this one to shape it as accurately as I could to the original echo character model. I even spent some time with pausing a lot of the episodes to get as much information as I could . Still lots to do as I realize it needs the bottom to be as a separate piece if it were to function correctly as it dose in the series with the bottom rear sliding back so he can slip it over his head.
I will continue to work on attempting a version that will do this and see how we go. This one is an STL so wont be ideal to separate out properly, but it is late here in NZ so will load the rest of the files when I get the chance, Hope you enjoy and as always the sizing is pretty good but a guess at best. Do check it suits you needs Cheers Jace
Finished revision 1 and uploaded as of 3/07/2021 "Helmet All in One file "where I fixed some small mistakes that was bugging me and made the whole helmet one piece. Looks good ; ) I'd use the .3MF file which should easily separate the side pieces which a meant to represent the clear parts if you want to include LED's, Cheers Jace
4/07/2021 New split Component version uploaded https://www.thingiverse.com/thing:4900125/files
Print Settings
Printer Brand:
Creality
Printer:
CR-10
No
Supports:
Yes
0.2
Infill:
20%
Filament:
ABS Home Made Home Made ABS
Category: 3D Printing