My Prusa Buddy3D Cam Final Solution for MK4/MK4S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Puts my modified Prusa Buddy3D Camera on my MK4S
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 63
- Wydruki
- 3
- Wyświetlenia
- 1178
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In order to fit my modified Prusa Buddy3d Cam to my Prusa MK4S, I designed remixed a few parts .
My creations are the 3 downloadable STL files here, arm/clamp/sleeve .
Printed on my Prusa MK4S in PETG with 0.4mm nozzle / 0.15mm layer hight . Please use supports where needed.
Special thanks for the other files to the creators :
@hachleitner_1769169 for his ESP32 Camera X-Motor mount for Prusa MK4 / MK4S with articulated arm . I just used it without any modifications an all worked fine. If you like this project, or parts of it, please download this part from him and give credits to him also.
@MichalFanta for his screws (1 screw=2 parts) that I used to tighten things. To download them, please go to his Articulated arm , and dont forget to credit him .
If you like to reduce the size of you Prusa Buddy3D Camera like me, just visit :
@Holck_66633 with his Prusa Buddy 3D Camera Redux - Tiny enclosure for the camera
Thank you all for showing in on this page. Please share your makes if you have some, cause that makes me happy ;)