Funtime Foxy FNAF Wearable mask
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi Mike, I originally found this model as a .GMA file on line and then was able to extract to a .FBX and then to .OBJ…
- Ocena
- 0 / 5
- Polubienia
- 174
- Pobrania
- 1639
- Wydruki
- 0
- Wyświetlenia
- 14 554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi Mike, I originally found this model as a .GMA file on line and then was able to extract to a .FBX and then to .OBJ , STL and eventually .3MF
I've included all the history files while working on this model so a lot of it is irrelevant.
But just incase some one wanted to manipulate further.
I have split files and seated them ready to print and I've tried to eliminate as much as possible around 95% of any supports that would have otherwise been required.
If you do see any over hangs, slice them accordingly further to print separately.
To Print the print ready separated files, Open in Windows 3DBuilder "Choose ungroup, sellect all and then "Ctr left click" to deselect the model you want to print, delete the highlighted rest. Save that one component as PT1 and prepare to print. Use the rewind arrow at the top to then repeat the process on to the next part you want to print.
Please see I've included a couple of video's I made below, to specifically show those how to slice the models further if required.
https://youtu.be/JRgS-b63G9w
https://youtu.be/KCIB8\_Bq7Tc
Good luck on your journey to print this. I look forward to see posts of your Daughter wearing it, Cheers Jace
Print Settings
Rafts:
No
Supports:
No
200
Infill:
20
Filament:
CR10 ABS
Category: 3D Printing