Multi-size mailbox numbers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With a variety of sizes to fit any space.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 146
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Share Alike
Introduction
This model is designed to be placed on your mailboxes or to be mounted on any wall in your home. Two different models, with different mounting options, allows the option to mount to most surfaces. Each number comes in 2 sizes; 50mm and 100mm.
Printing
Because this model is prioritized to be used outdoors, use a stronger material such as PETG or ABS. Thermoplastics such as PLA will eventually warp over time when exposed to humid conditions. These settings are recommended to ensure the best print quality and print speed.
| Material | ABS, PETG |
| Walls | 4 |
| Infill | 20% |
| Bed Adhesion | Brim (8mm width or greater) |
| Supports | No |
Assembly
When gluing the letters onto the surface, make sure to use a compatible glue. Epoxy glue is best for gluing onto brick, concrete or ceramic walls. If instead you choose to screw in the numbers, use M3 or 4G Screws with a length of at least 16mm. Use Stainless steel screws as Zinc-plated ones will rust quickly under outdoor conditions.
Note
Currently, only m3 screws can be used with the model. I am working on a version that uses imperial screws, and should be done soon.
Conclusion
In conclusion, this is a neat and handy print to replace any old mailbox numbers. With the ability to come in multiple sizes, these can fit in almost any space.