PSU relocation Ender 3 Pro - Left Side with Removable Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a rear-mount for the power supply (PSU) of an Ender 3 Pro. It's compatible with the dual z-axis upgrade.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 667
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a rear-mount for the power supply (PSU) of an Ender 3 Pro. It's compatible with dual z-axis upgrades. It requires 2-4 M5x12 screws, an M4x8 screw with T-nut, 6 M3x4 screws, and the power plug from original PSU casing with it's original mounting screws or two M3x4 screws.
This has been remixed from https://www.printables.com/model/501819-psu-relocation-ender-3-pro. I wanted the plug on the opposite side and the top to be removable for easy access to the PSU terminals, so this is the result. A couple other changes have also been made including some minor aesthetic and tolerance tweaks.
The four M5 screws that attach the case to the Ender's frame can easily be reduced to two screws. Since the frame does not have threaded holes in the rear for those M5 screws you can either cut some threads with a tap and die or just Leroy Jenkins the screws right in. If going for the latter, a drop of machine oil on the screw threads helps to work them in better.