1 / 3
Adapter for I-Spec II Brakes and Sram shifter — zdjęcie 1
1 / 3

Adapter for I-Spec II Brakes and Sram shifter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2019_05_31 New improved and thicker version. I'm using it for a week or so and till now it works fine. File contains…

Ocena
0 / 5
Polubienia
16
Pobrania
97
Wydruki
0
Wyświetlenia
672
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

2019_05_31
New improved and thicker version. I'm using it for a week or so and till now it works fine. File contains right version only, if you need left, just mirror it.

2019_05_20
After 2-day enduro race The adapter broke again. It needs some more improvements...

2019_05_14
Updated version: thicker collar, added material and hopefully strength where previous version broke. NOT TESTED YET

Adapter for I-Spec II Brakes and Sram shifter (X5, X7, NX, GX...). Also works with compatible remote levers for dropper posts.
Replacement for Mismatch 1.2 adapter.

Print Settings

Printer Brand:

Prusa

Printer:

Mk2.5s

Rafts:

No

Supports:

No

Resolution:

0,15mm

Infill:

100%


Filament:

any PET-G

Notes:

The print does not need supports.
There are LEFT and RIGHT (on the handlebars riders view) versions and are not interchangeable.

Post-Printing

If you want to achieve extra clean look, you can use belt sender to get rid of unnecessary triangular part. Or you could alter the model and print with supports. Sanding the triangle off is cleaner and better looking solution :)

Category: Parts

Tagi