Hiby R1 HiFi Player TPU case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple but a bit overengineered case for your Hiby R1
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 295
- Wydruki
- 0
- Wyświetlenia
- 1352
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made a case for my Hiby R1
All buttons are tactile, so you can continue to use them without looking
All icons on buttons are the same
Made 9 versions to make to this state
Printed with Esun TPU 95A on BambuLab X1C
There can be some strings of TPU after the print on the front side inside the case, depending on your printer, filament and settings. Thats ok, just rip them off.
Tolerance of audio jack was checked with my KZ AS10 with standard cable and lots of others, so there's more space for bigger cables
Tolerance of USB-C cable was checked with the biggest cable that i have and everything is OK
Share your prints and listen to a good music!
UPD: Added version without hole for SD card (not tested, but i think it's the same)