Dextro Energy EDC case with less tight lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small tweak on the original Dextro case for diabetics to make it easier to remove top lid.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 1009
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Great design but after fitting the lid on the box I was unable to take the lid off again! It was just too tight (lid & box have the same length sides, meaning no margins) and I believe mine was also so tight it created a small vacuum, making it even harder to remove.
So I've added a 0.1mm margin on the lid as well as a small “DEX” text on the lid to get around it creating a vacuum (while also looking nice). I used a different text for mine though, as can be seen in the screenshot.
While I was at it I also changed the fillet to a chamfer since fillets don't print nicely when curved up from the build plate.
Printed in PLA with same settings as original version:
Perimeters: 2 is enough with a 0.4 mm nozzle. Just make sure the perimeters covers the complete wall thickness.
Infill: Doesn't matter, or 100% if printing in other than 0.2 mm layers.
Layers: 6 bottom, 4 top (standard setting).