1 / 3
Makita Track Saw to Rigid Hose Adapter — zdjęcie 1
1 / 3

Makita Track Saw to Rigid Hose Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This adapter connects the Makita SP6000J track saw to the Rigid 1 7/8 hose with locking hooks.

Ocena
0 / 5
Polubienia
15
Pobrania
68
Wydruki
0
Wyświetlenia
367
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

This hose adapter will fit the Makita track saw very snug (will not swivel when the saw is reassembled), and will accept the O-Ring from the original dust port on the saw. The saw will even fit back in its original case after this is installed!

The print is a little tricky, I printed with the large side down and definitely used supports on the underside of the small side. Mine came out a little rough with the minimal supports I used so I would paint on a little more than the auto-generated “overhang only” ones.

Included the f3d file if anyone wants to remix to smooth the interior of the adapter.

Tagi