Canary - I'm just saying
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Funny Sign with Stand
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This sign is a remix of https://www.printables.com/model/492554-funny-sign-im-not-saying-your-perfume-is-too-stron by @Spudd78
You can download the stand here.
https://www.printables.com/model/1063406-sign-stand
Printer Settings
PrusaSlicer 2.9
Layer Height - .2
Perimeters – 2
Minimum Shell Thickness Top and Bottom – 2mm
Top Fill Pattern – Monotonic Lines
Bottom Fill Pattern – Monotonic
Skirt – 0
Brim – Inner brim only (Signs with Hangers)
Fill Angle - 0
Seam Position – I use Aligned on the Wipe Cylinder and signs with hangers. On the signs without a hanger, I paint the Seam on the bottom in the middle.
Wipe Cylinder – 2 Color and 2 Color with Hanger
Height Range Modifier
- Start Height - 0.2
- Stop Height - 2.2
- Layer Height - 0.2
Add Settings – Infill – Fill Density - 0%
Layers and Perimeters
- Top and Bottom 0
- Perimeters 1
Make sure the Wipe Cylinder prints first.
Wipe Cylinder – 3 Color and 3 Color with Hanger
Height Range Modifier
- Start Height - 0.2
- Stop Height – 3.2
- Layer Height - 0.2
Add Settings – Infill – Fill Density - 0%
Layers and Perimeters
- Top and Bottom 0
- Perimeters 1
Make sure the Wipe Cylinder prints first.
Sign - 2 Color and 2 Color with Hanger
Height Range Modifier
- Start Height – 2
- Stop Height – 2.8
- Layer Height - 0.2
Add Settings – Infill – Fill Angle – 90
Add Settings - Layers and Perimeters – Single perimeter on top surfaces – All top surfaces
Color change at 2.2mm
Sign – 3 Color and 3 Color with Hanger
Height Range Modifier
- Start Height – 2
- Stop Height – 3.4
- Layer Height - 0.2
Add Settings - Layers and Perimeters – Single perimeter on top surfaces – All top surfaces
Color changes
- 2.2mm – Black
- 2.8mm – White
- 3.2mm - Yellow
I tried using 4 layers of Yellow but I think 2 layers of White and 2 layers of Yellow looks better. It will all depend on how translucent your Yellow is.
If you don’t like my settings and you have better ones let me know. I’m always looking for better ways to print things.
If you have any questions, just ask.
Please post pictures!!!
Filament used in the pictures.
Prusa PLA Marble Grey, Galaxy Black and Pineapple Yellow
Printed Solid PLA Jessie White