The Moog, nik nak box.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
the Moog , color print, 4 colors, 0.4 nozzle, best printed using .1 or .15 layer height.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Moog is based on a character from a children's tv show in the 1980's called ‘willow o wisp’.
its designed to be printed in 4 colours , at a layer height of either .15 or .1 at 2600% scale . this will yield a character of about 10 cms tall. Anything smaller and detail will probably be missing .
I used prusa slicer and use this method to load the parts , other slicers will be different , so might need some experimentation.
To import the parts into prusa slicer make sure you have the ‘Prusa xl 5 Colour’ profile selected , go to import stl's , select all the stl's except box.stl and then click import, it will probably want to recalculate the dimensions into inches , say ‘No’ to all those pop up messages, but at the end when prusa slicer asks ‘multiple objects detected’ it will want to treat mutilple parts as one object says ‘YES’. If everything goes well you can control all the parts using the one object at the top of the list , scale this to 2600 pecent , hopefully this will result in a model about 10cms tall.
Best print the box separately at 2600 %.
I have included the ‘moog.3mf’ file as i would print on my ‘prusa xl 5 tool’ purely as a guide.