Lightsaber Wallmount (Rebel Alliance Logo)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wallmount vor any Lightsaber hilt. Strong design also suitable for heavy hilts
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
The wall mount is used to display a lightsaber hilt.
The arms on which the hilt rests are clipped into the base and are held in place without screws or glue.
The base is raised by 10mm and has an edge of 5mm.
The wall mount therefore floats on the wall and can also be backlit with an LED strip if required.
There are two versions of the base. One blank and one with a recess for a plaque.
Size of the recess: 75mm x 40 x 2mm
The blank version can be printed without support material.
The recessed version must be printed with support material.
Recommended layer height: ≤ 0.2mm (Drill holes stepped by 0.2mm for better printing results.)
Material as desired.
Screws up to 5mm diameter with a head up to 8mm are recommended for fastening.