Fire Blanket Hooks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fire Blanket Hook used to hang Fire Safety Blanket.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fire Blanket Hook used to hang Fire Safety Blanket. Recommended to print with supports using PETG or stronger filament at 100% infill for extra strength. I used pan head screws to secure my hooks with #8 ½” screws as pictured. Make sure to check your depth before using any screws to ensure that you do not penetrate through the material.
I found some other models and tried to print them only to realize that the hook was to large for the eyelet on the Fire Blanket that I had purchased. after several failed scaling attempts, I decided to design my own hook using Tinkercad.
As always, our designs are free to the public for personal use, just not to sell (NON-COMMERCIAL).
If you like what I'm doing here, please consider making a small donation.