Espresso Portafilter Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A funnel for portafilters... I made two slightly different versions for the portafilters of a Quickmill 3004 and…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 86
- Wydruki
- 2
- Wyświetlenia
- 867
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
A funnel for portafilters...
I made two slightly different versions for the portafilters of a Quickmill 3004 and Gaggia Classic.
It is held and centered by wings that go around on the outside.
This way the hole in the middle can be large enough so you can tamper without removing the funnel first.
I have also designed the tamper station from the photo:
https://www.thingiverse.com/thing:3253961
Print Settings
Supports:
No
Resolution:
0.1
Filament:
[
DAS FILAMENT PETG ](http://www.amazon.com/s?url=search-alias&field-keywords=DAS+FILAMENT+PETG&tag=thingiverse09-20) Transparent Red
Notes:
printed upside down to avoid the need for support
funnel sanded for smoothing
Category: Kitchen & Dining