OLight I3T 2 EOS AAA Flashlight Holder, 4 Magnet Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 4 magnet OLight I3T 2 EOS AAA flashlight holder for metal, Hyundai magnet spot, fridge etc., works in holder.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 491
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I changed the model to fit my needs of a place to store my $20 (late '24) OLight I3T 2 EOS with magnets on the magnetic spot on my Hyundai Kona (see pic). The flashlight works great in the holder, so just pick it up and use it as I removed material around the led and lens. This holder needs 4 10mm x 2mm or 10mm x 3mm strong magnets. I used 10 x 3 on my setup. All magnet holes will need gluing in and I used superglue (carefully). You can use most filaments I used a Princess Purple Sparkles PLA but I will eventually print it again in black PCTG or PLA+. It could stick to anything metal! It fits pretty tight but not too snug. When I tried the original file that I remixed it was too small but worked when I resized it .005 percent. This version doesn't block light throw! It was printed on my Elegoo Neptune 4 Pro w Micro Swiss Flowtech Hotend.