Ryobi Battery Charger (2024, Model PCG002) - Wall Control Mount Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Ryobi 18V battery chargers (2024, Model PCG002) to Wall Control panels
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 117
- Wydruki
- 1
- Wyświetlenia
- 826
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
Slides in the holes on the bottom of 18V Ryobi battery chargers (Model PCG002 [the one that specifies there are 114mm between the mount holes - see photo] and possibly others) so they can be mounted on pegboard.
My print settings (you may be able to get away with quicker & less material, but this took just under an hour): Oriented on it's skinny side (to avoid poorly oriented layer lines at the part of the model where it sticks into the wall control panel), print w support (tree slim to save a few minutes, tree default if you want a nicer looking print), PLA, 100% infill, 0.2mm layer height.