Adjustment Bar for Taper Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable taper jig for a table saw. Dimensions: 250mm x 29mm x 20mm ; slot is 9mm wide.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Quick print to create an adjustable taper jig for a table saw.
Dimensions: 250mm x 29mm x 20mm ; slot is 9mm wide.
I did have issues with the print lifting on one end (I did not use any additional adhesive on bed) as it is a relatively long and thin print. However, this didn't affect in use.
Picture doesn't show washers on top but I recommend using them on bottom and top, as I started to damage print after a couple uses, not that it matters too much as I can quickly print another if needed.
Print Settings
Printer:
i3 MK2S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.3mm
Infill:
30% min.