1 / 8
Engine mount for WindowMaster
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Improved (stronger) motor mount for Window Master WMU1200101.
Among other things, the wall thickness has been increased by one millimeter to prevent the motor holder from breaking again.
The holder consists of two parts (for better printing).
The first part was printed with the closed side on the print bed. Support material was used for the screw points (maybe not necessary).
For the second part, after printing, an M3 thread must be cut into it and then screwed with an M3 screw (inserted from the inside of the first part).
All parts were printed with 1.5mm layer height and 0,4mm nozzle.