STGW 90 SG 55x Bolt Carrier Dummy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dummy as replacement when storing the gun without bolt and carrier
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 525
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this model to replace the original bolt and carrier when storing the gun.
The dummy protects the gun from dust and makes it look nicer. I printed the carrier from pla which is sufficient. However, do not release the bolt with the bolt catch or it will break.
I uploaded multiple versions of the bolt carrier; short and extended as well as plain and decorative. The extended version lets the hammer rest on the bolt as it would be in the original while the short version allows movement to the rearmost position. Functionally all version are indentical.
I recommend to print at a 45 deg angle with at least 4 walls and 20% infill, no support needed