Bottle opener laser/engraving jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig for 5 bottle openers to help alignment during laser engraving
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 369
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Jig for 5 bottle openers to help alignment during laser engraving. The holes are designed to work with size differences in bottle openers. It's best to select 5 similar bottle openers for engraving to ensure laser focus is correct for all 5.
Left bottom corner is 0XY. The numbers on the right show the middle axis of each bottle opener in millimetres. The front and back of the wooden handle are spaced 15mm from the edge. Depending on variations in the bottle openers (which are quite large to be honest) it's up to you do from where you want to your alignment.
See the dimensional drawing for more info in case my description isn't clear.