Box Cutter For 25mm Blades
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box cutter body for 25mm blades. You only need to print 4 models, the 5th is there for practical customizability.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Build Instructions:
Pick a body, slot or holes (I prefer slot). Then add the bolt, the cover and the fixation to your print. [Note: I used PLA in the example shown in the photos]
Once printed take the body and insert the 25mm blade. Then insert the fixation and make sure the hole lines up with the one on the blade, screw in the bolt and you are done. It's the same for the blade cover.
To use just loosen the bolt a bit to adjust the blade and tighten to secure it.
If you find this model helpful please leave a like and also check out Wolfi01, he's the one who made what I am remixing.