Clipper Guard for Andis 24675 UtraEdge2 (AGC2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attaches to a #10, 1.5mm metal guard. Includes both 6mm and 3mm variations of the friction fit guard. (print with brim!)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Attaches to a #10, 1.5mm metal guard. Includes both 6mm and 3mm variations of the friction fit guard.
Print with brim!
Supports are optional. I painted them on in Prusa Slicer on the left and right edge of the incline, printed with the bottom flat part of the blades touching the build plate (just like you would use them).
Make sure the first 3 layers go on well before you walk away. I printed this successfully with a Prusa MK3+
Clipper head is 40mm x 44mm x 4mm
It assumes there is a 1.5mm from the front tip of the clipper to the cutting edge.
(The photo is PLA 0.3 mm layer lines but I think it looks better with thinner layers.)