1 / 23
Porsche GT3 Center Console delete for Porsche 996 and 986 ( Boxster) — zdjęcie 1
1 / 23

Porsche GT3 Center Console delete for Porsche 996 and 986 ( Boxster)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Porsche GT3 Center Console delete for Porsche 996 and 986 ( Boxster) model cars. Credit to XR4Y on thingiverse

Ocena
0 / 5
Polubienia
24
Pobrania
476
Wydruki
0
Wyświetlenia
1908
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

986 GT3 Center Console Delete

The split file is to fit on a Prusa Mk3s

Recommend using PETG

Must remove orange tabs on the bracket to mount

Left enough room to upholster part

Fit as one part on Prusa XL. Used PETG with organic supports. Used 3mm brim since part is thin and long, but would recomend atleast double that at 6mm. It started to detach near outer thinnest corners. Didnt impact the print, but would prefer perfect results :)

I am going to wrap this in the below carpet. Have heard that it being 2mm thin in many areas with the carpet shrinking over time causing warping. Will test this out and release revision if it needs to be thicker. Likely 3-4mm walls.

 

carpet suggestion:

https://gahh.com/

https://www.upholsterysupplyusa.com/

https://trufitauto.com.au/product/plush-pile-meterage-off-the-roll-1mtr-wide

Tagi