RoeTest Socket Adapter Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design related to Helmut Weigl's RoeTest tube tester: Socket Adapter Base
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
General information
At the end of 2024, I set up version 11 of Helmut Weigl's RoeTest. In the process, I created some 3D designs that I am making available to the community in this collection. You can read more information about my build of the RoeTest and the use of the designs published here in my build report at Radio-Bastler.de (German) or on the RoeTest website (German).
About this Design
This part is the socket adapter base on the frontpanel of the RoeTest. It consists of a base and a lid. I recommend to print both of them from PETG in variable layer height 0.1…0.3mm.
Screws:
- 4pcs M3 x 5mm flathead screws to mount the base to the RoeTest
- 4pcs M3 x 5…8mm flathead screws to mount the lid to the base
- 2pcs M4 x 16mm flathead screws and 2pcs. M4 nuts to mount the connector to the base
You can also galvanize the inner in order to have shielding.
OpenScad source code included.
Happy printing!
If you like this design, then please leave a like and also post a make in the comments.
You might also want to check out my other designs