Replacement strap for Pro Jump Stilts, Snowboots Skates etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement strap for projump stilts, snowboots, skates etc.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I was gifted a pair of old Pro Jump Stilts which had broken straps on them so I decided to redesign the straps and get them usable.
I have started with the front strap, which is this model. I have printed it and got it working and clicking correctly with the buckle on the projump stilts. however after stress testing the PLA I used to print I'd probably recommend using ABS as the PLA snapped, maybe if I used I higher infill it may have been stronger and withstood the stress of bending.
Presuming they are universal strap size for skates and snow boots but not 100% sure so double check before printing.