FT Simple Soarer Elevator Brace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After beveling the hinge for the FT Simple Soarer like Josh shows in the build video, you are left with what I think…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
After beveling the hinge for the FT Simple Soarer like Josh shows in the build video, you are left with what I think is too weak of an elevator. My first FT SS I used a 1.5" long bamboo skewer glued in to try to strengthen the elevator to ensure both sides moved in tandem when the servo horn actuated the elevator.
This simple, light weight design slips over and gets glued on before assembling the tail feathers.
It is quite possible that Josh uses the same dimensions on some of the other FT designed elevators so this could possibly work with more FT designs. If anyone confirms, please comment and I'll update the description.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
Yes
.20
Infill:
20%
Notes:
I had to use a 3mm brim and also supports to get this to print sucessfully. It is a super quick print and very easy to get both the brim and the minimal supports off.
Post-Printing
Brim and supports required
The clearance holes needs to be made just a bit larger to allow free movement. Dry fit and test before glueing.
Fusion 360
Category: R/C Vehicles