Chamfer and Fillet Gauges that match Fusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed this to match how Fusion 360 calculated the chamfer and fillets.
- Ocena
- 3 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 267
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution
I remixed these to match what happens in Fusion so you can just add this number to Fusion's chamfer and fillets to get the exact fit you're looking for.
I included the step file so you can do custom chamfers and fillets up to 15mm. Just edit the parameters. Also, you will need to suppress whichever you aren't using, fillets or chamfers.
In photo blue is original whereas red is information needed in Fusion for the same result. You will still need to download the container Base from the original author. I modified the lid to have stronger side clips that attach to the base. Lid v2,v3,v4 are with thicker side rails and different variations.
- Please note, these aren't labeled, You will need to add Text from your Slicer with whatever settings you like. My model is parametric and so it was easier to add the text in the slicer.