Creality CFS Drawer Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Creality CFS Drawer Rack mounted to a frame built from 400mm 2020 Extrusions.
- Ocena
- 4 / 5
- Polubienia
- 79
- Pobrania
- 305
- Wydruki
- 2
- Wyświetlenia
- 4751
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Added more photos for the heat intererts and assembly.
You must print on a larger printer since the side pieces are just over 300mm. (K2 Plus or similar)
I did print this in PLA but I might go back and reprint it in ABS/ASA.
Print settings were - 3 Walls 15% Crosshatch
You can beef up the infill if you want them stronger.
Where the parts screw together or where the drawer slides mount to the printed parts I used heat inserts.
Extrusions -
10 - 400 mm extrusions https://www.amazon.com/gp/product/B0CLGXGXTQ
Printed Parts -
8 End caps - https://www.printables.com/model/352616-ender-3-2020-end-cap
12 Jointing plates - https://www.printables.com/model/125303-90-degree-joining-plate
Fasteners:
64 - m4-10mm screws for the jointing plates/drawer slides - https://www.amazon.com/dp/B09R3QHPHX
8 - m4 x6mm - https://www.amazon.com/MroMax-M4x6mm-Button-Screws-Plating/dp/B07ZLPJNH3
2 pairs of 14" drawer Slides - (I have a few left over.) https://www.amazon.com/dp/B07HNJW8NZ
16 - M4x6 Heat Inserts - https://www.amazon.com/Printing-M4x6x6mm-Threaded-Embedment-Automotive/dp/B0CX8VQYWM
72 - M4 t-nuts for 2020 extrusion - https://www.amazon.com/HELIFOUNER-Pieces-2020-Aluminum-Profile/dp/B0B2137461