1 / 7
Safety Cover for Side-Cutter Tips v1.1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Safety Cover for Side-Cutter Tips. PLA. If you've lost your little cap, this will just work. v.1.1
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 279
- Wydruki
- 5
- Wyświetlenia
- 1432
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 5) (Komentarze: 10)Remiksy (0)Kolekcje (66)Powiązane
Safety Cover for Side-Cutter Tips. PLA. If you've lost your little cap, this will just work.
Also seen in the pics / video:
Flashforge Adventurer 5M (AD5M) Side Cutter Mount v1.0
Change log:
- June 14, 2025 - v1.1 - only change was the openings for the cutters adjusted to get a better “snug fit” so the safety cover hopefully won't fall off when the side-cutters are held turned sharp-side-down. Original (loose fit) was 2.4mm. Today I added both 2.1mm (normal fit) and 1.8mm (snug fit - recommended). I printed the 1.8mm and it gave the snug fit I was looking for.
- 1.8mm SNUG FIT - recommended
- 2.1mm NORMAL FIT
- 2.4mm LOOSE FIT
- January 1, 2025 - initial upload of v1.0
Other cool options for the AD5M
You may also like my other AD5M related design work:
- https://www.printables.com/model/785667-flashforge-adventurer-5m-ad5m-simpler-easier-faste
- https://www.printables.com/model/813334-flashforge-adventurer-5m-ad5m-printed-camera-mount
- https://www.printables.com/model/814546-flashforge-adventurer-5m-ad5m-nozzle-storage-box-t
- https://www.printables.com/model/827706-flashforge-adventurer-5-ad5m-led-mod-accessory-buc
- https://www.printables.com/model/828632-flashforge-adventurer-5-ad5m-led-light-bars-mod-ac
- https://www.printables.com/model/834011-flashforge-adventurer-5m-ad5m-side-cutter-mount-v1
- https://www.printables.com/model/834097-flashforge-adventurer-5m-ad5m-improved-spool-holde
- https://www.printables.com/model/886714-flashforge-adventurer-5m-ad5m-filament-cutter-comp
- https://www.printables.com/model/1119699-flashforge-ad5m-enclosure-hinge-remixed-to-be-easi
- https://www.printables.com/model/1119872-flashforge-ad5m-door-handle-remixed-to-print-witho
- https://www.printables.com/model/1129412-safety-cover-for-side-cutter-tips
Use Klipper stuff on AD5M stock hardware…
- …such as Mainsail, Fluidd, and Klipperscreen, etc, with the stock Klipper install on the AD5M's main board.
- Get it here: https://github.com/xblax/flashforge_adm5_klipper_mod
Check out other cool AD5M related options here:
My PayPal tip jar: https://paypal.me/design8studio