Gridfinity Ruler 5+6 Grids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remake contains a 5 and 6 grid ruler for determination of gridfinity bins.A slider is used for height determination
- Ocena
- 4,862 / 5
- Polubienia
- 292
- Pobrania
- 3179
- Wydruki
- 31
- Wyświetlenia
- 9327
- Oceny
- 29
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you can print 252mm long, you can print the 6-grid-version. If you have less print capabilities or definitely want the 5-grid-version, use this. Slider and Pin fit both.
At 3.8mm or adequate (depending on your layerheight) you may implement a color change for better readability of the numbers.
The slider is used for checking height. Without slider out there is the pure height pattern of 7mm. Approx. 3.75mm is added for total height. Therefore, I added this slider, to give you a rough idea of the total height of the bin.
I am configent, that you'll figure it out. You're smart!
Designed in TinkerCad from imported file of “coincidence”. Thanks for sharing this great model. Printed on my BambuLab A1. After checkimnh that the slider moves seamlessly, you can insert the pin for locking the slider. I used some Loctite for this.
Explore my other Printables: https://www.printables.com/de/@Tritschi