WOODWERD Festool CXS MFT CADDY
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed for Festool MFT, secures CXS drill driver and WOODWERD Centrotec Bit Holder for easy access and organization
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
WOODWERD CXS CADDY is great for keeping your CXS 12 out of the way while right at a hand's reach.
The build has 4 parts. Print in a vertical orientation and select snug normal support.
Parts are:
CXS-MAIN (Main body)
CXS-Shelf (Stabilizer arm)
2x MFT T-Nut (From Festool)
Build Process
- Print parts ideally in a PETG or stronger materials.
- Heat set 4x M3 inserts into the Shelf part.
- Screw on 4 Keilverbinder Single connectors with M3 Screws
- Slide the shelf into the Main body and lock it into place
- Install MFT TNuts with M5 Bolts and Nuts through Main body arm holes
- Slide assembly onto MFT table rail
- Tighten MFT Nuts in position
Other Parts needed:
4 Keilverbinder Single Connector (from Shaper) [LINK]
4 M3 Heat Set Inserters [SAMPLE]
4 M3 Screws [SAMPLE]
2 M5 Bolts [SAMPLE]
2M5 Nuts [SAMPLE]
Additional Options:
If you want to have the Centrotec holder for use with Caddy and for use on the belt download it from the link HERE
You can watch exploded assembly views here: