Broom Handle (brush) connector replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement part for a broom to handle connector
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 306
- Wydruki
- 5
- Wyświetlenia
- 1056
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is a replacement part for a broom handle / Brush Handle. To connect the handle to the brush.
Plate is 50mm x 75mm, angle is 25 degrees
I have included 4 screw holes(4mm), a drainage hole in the center of the holder (3mm), and a hole for a screw for the handle (4mm).
The walls of the broom area are 5mm with reinforcement included in both sizes
It has 2 versions one with a 25mm Diameter and one with a 29mm dimeter
Attached images of the part I’m replacing shows the crack where it failed.
Printed in PETG and I’m pretty happy with it and how strong it is.