1 / 2
Isengard (Orthanc) Dice Tower - fits 26mm D20s, with magnet holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of https://www.thingiverse.com/thing:6438369 , with a 26mm center tube to fit 26mm dice, and magnet holes.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 138
- Wydruki
- 1
- Wyświetlenia
- 655
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (22)Powiązane
NOTE: this model by itself is incomplete, you must download the addition ground/base pieces from the original source https://www.thingiverse.com/thing:6438369. Specifically, this does NOT contain the surrounding grounds for the base, as I had no need to change those.