Wago 221-413 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount to secure a Wago 221-413 connector and its wiring.
- Ocena
- 3,75 / 5
- Polubienia
- 86
- Pobrania
- 676
- Wydruki
- 4
- Wyświetlenia
- 3893
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The 4mm 3 wires Wago connector is a useful electrical fitting. Often, it needs to be secured to a base plate. Wago do have base clips, but inconvenient to get hold of. Here is my design for a quick solution.
In addition to the Wago connector mount, I designed a wire bracket to clamp the thick and stiff electrical wires that you maybe clamping in the connector. The bracket will prevent any wire movement pressure away from the Wago connector itself.
Here is my 3D design. My design may match your needs, too.
To help you with your projects, I've attached a STEP file to include in your designs.
My print is made in PETG 1.75mm Aurarum red filament, with 0.2mm layer height and 25% infill on a PRUSA I3 MK3S printer.
I hope you can find this design useful, too.
Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.