Divider for madesmart Mini Bath Organizer

Since madesmart doesn't sell replacement/extra dividers for their bath organizers, I decided to print my own. There's a handful of existing models, but none that mimicked the mesh style of the originals to my liking and I didn't need the tab feature.

This divider is specifically sized for the the smaller/narrower version of the madesmart Two Tier Bath Organizer:
https://www.madesmart.com/product-page/mini-two-tier-organizer-with-dividers-bath

This will NOT fit the larger/regular organizer. Due to the different proportions, you unfortunately can't just scale it up, either (I learned this the hard way when I tried to scale down a model for the larger organizer's divider).

The 3mf and g-code include 4 instances setup for a honeycomb inset. You can easily change in the infill pattern, remove the infill inset entirely, and/or turn off instances in the 3mf.

The parametric model (STL) is composed of two pieces:

1. The main body of the divider (solid piece)
2. An inset piece for easy and pretty exposure of the infill pattern

If you want to work directly from the STLs, some notes & recommendations:

• The infill inset is designed to be coincident with the main body of the divider. If you import both without moving them, they should line up correctly.
• To reproduce the mesh, you'll want to expose the infill on the inset. To do this, reduce your top & bottom layers to 0. I also recommend reducing the perimeter to 1 (otherwise you get some odd extra lines at the edge of the infill pattern). 
• The dividers don't require a super precise fit, so you can print these on draft settings and probably be fine.
• I did not print with a brim and had some trouble with warping when I printed near the edge of my print bed, but none when I printed in the center. YMMV, but you might want to include a brim to be safe.