1 / 4
Axial SCX6 tube rear bumper bar — zdjęcie 1
1 / 4

Axial SCX6 tube rear bumper bar

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Axial SCX6 tube rear bumper bar to suit Pro-Line Racing Cliffhanger body

Ocena
0 / 5
Polubienia
12
Pobrania
147
Wydruki
0
Wyświetlenia
586
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

I made this tube rear bumper bar for my SCX6 to suit the Pro-Line Racing Cliffhanger body. It's designed to be similar in styling to the tube front bumper file offered by Pro-Line on their website. I've also included it here too for convenience.

I've attached 2 variants of my tube bar- one with an Axial name plate, and one without.

Printing requires supports. For best results, print the tube bar upside-down. It requires less support material this way. I prefer to print it with a line layer height, say 0.1mm or less.