Guides for XTool F1 with RA2 Pro rotary
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alignment kit for the rotary either with chuck or with roll position C.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Using the RA2Pro option on XtoolF1 is very difficult to align the center line of the object to the the center of the laser spot. With this kit, you have useful guides that fit in the grooves of the RA2 Pro baseplate and can be fixed on the F1 base with screws M3x5 flat head (fits Phil #1 or socket both).
When not in use you can store the screws on the threaded holes in the center of the guide.
To support the weight of the motor you can use the special support mounting the spacer on an additional guide plus M3x5 and the special nut or screws M3x10 and standard nut.
I suggest making one single guide at first to find the X/Y/Z shrink ratio to apply to the print and achieve the perfect dimensions(i.e. PETG 0,4mm nozzle, 0,2 layer → scale up ratio 100.33): total length 120 mm, fixing holes spacing 92.4 mm