Custom Motive Toddler Puzzle With Large Pieces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a small 9 piece puzzle for small kids with large pieces.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this small 9 pieces puzzle for my kid (150x150mm) with large pieces. You can use it as a base for your own design or glue a picture on it.
Add a picture
If you want to put a image on it instead of printing a motive, just glue a picture on it.
For better adhesion you can sand it before gluing. It is easier to glue the picture on it if it is still stuck to the build plate. So you can sand it before taking still on the build plate. This way the pieces is fixed and the spacing is homogen.
After sanding, put the glue on the back of the picture, and then put the fix the picture on the puzzle. If you want to make it a bit more durable put a self-adhesive film on top of the picture before gluing.
Put a book or something to get an even pressure on the picture. I used CA glue without activator, since I am not sure about the activator and kids putting the pieces in their mouth.
When the glue is cured you can trace the pieces with an exacto knive.
Spacing
There is 4 alternative versions with different spacing (0,2-0,5mm). Choose the one that suits your machine and needs. Otherwise you can end up with pieces that are to snug or too loose.
Sources:
I used this tutorial to make the puzzle:
https://www.instructables.com/Make-Your-Own-3D-jigsaw-puzzle/
To make it a bit nicer than just black pieces, I used this great cat picture from Marta Simon. https://pixabay.com/users/limoncitosketching-7400657/